Multi Purpose Powder Smooth Finish Filler
How will this colour look?
This colour finish isn't available to buy here. You can purchase it through one of our approved retailers.
Description
Fill holes in almost any surface including plaster, stone, concrete and wood. Our Multi Purpose Powder has a smooth finish so it’s easy to sand. It’s tough too and won’t shrink or crack.
Product features
- Fill holes up to 40mm deep
- Comes with a measuring scoop and applicator
- Dry in one to two hours
- Suitable for interior and exterior use
- Minimal prep needed
How do the colours look?
Use on...
Interior wood
Plaster
Exterior wood
Interior & Exterior stone & concrete
There’s not a lot of preparation needed, all you have to do is make sure the area is clean from grease and dust and dry too.
- Using the measuring scoop, mix two parts filler to one part water.
- Push the filler firmly into the hole or crack, leaving a little bit slightly raised above the surface to ensure it’s completely filled.
- Before it dries, smooth it with a wet knife.
- If you’re filling holes that are deeper than 40mm, you will need to build up in layers waiting one to two hours between layers. Before each is dry, smooth over with a wet knife.
After one to two hours, you’ll be able to redecorate over the filler.
Cleaning
Tools can all be cleaned in warm, soapy water.