Total Wood Preserver
How will this colour look?
This colour finish isn't available to buy here. You can purchase it through one of our approved retailers.
Description
Ideal for sheds and fences, our Total Wood Preserver prevents rot, decay and wood discolouring fungi. It also protects against woodworm infestation so your wood stays healthy.
Product features
- Preserves rough sawn or smooth planed exterior wood
- Water repellent formula but not waterproof
- Prevents rot and decay
- Protects against woodworm attack and infestation
How much preserver do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how mnay litres you'll need to complete your project
Your measurements:
You will need:
How do the colours look?
Use on...
Rough sawn wood
Smooth planed wood
- Make sure the surface is clean and dry. Use a stiff broom to get rid of any ingrained dirt.
- If you have mould, algae or fungi, use a garden cleaner to get rid of them.
- Decayed wood should be strengthened with a wood hardener.
- If there is any paint, stain or varnish on the wood you will need to remove it. You can do this with a stripper or sanding the surface.
- Give the tin a good shake to mix the colour pigments.
- Dip the end grains into the preserver so it completely soaks into the wood.
- Use a brush to apply preserver to the rest of the wood.
- Wait 24 hours for the first coat to dry.
- Add a second coat, following the same process.
- If you need to carry out any repairs or gluing, wait until the second coat is totally dry.
To keep your wood in a good condition, apply a new coat every year.
Cleaning
- Remove as much excess product off your brush as you can.
- Clean it with a brush cleaner
You should never empty left over preserver into drains or watercourses. To find out how to properly dispose of your leftovers, contact your local council.